Study of the protective properties of thin metal coatings obtained by magnetron sputtering on low-alloy molybdenum alloys
- 作者: Kolomytsev K.A.1,2, Potekhina N.V.1,3, Kiselev D.S.1,2, Zaitsev D.A.1, Ovsyannikov G.N.1,3
-
隶属关系:
- NII NPO “LUCH”
- National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
- Lomonosov Moscow State University
- 期: 编号 1 (2025)
- 页面: 67—77
- 栏目: Articles
- URL: https://ruspoj.com/0869-5733/article/view/686075
- DOI: https://doi.org/10.31857/S0869573325016777
- ID: 686075
如何引用文章
详细
The influence of chromium and titanium coatings on the gas corrosion of low-alloyed molybdenum alloys has been investigated. The samples after the gas corrosion test were analyzed using scanning electron microscopy and X-ray phase analysis. It is shown that the phase composition of corrosion products varies for different temperature ranges. The dependence of the depth of corrosion damage on the thickness of the coatings was determined. It is established that magnetron coatings of a certain thickness can peel off due to a defective structure.
作者简介
K. Kolomytsev
NII NPO “LUCH”; National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
编辑信件的主要联系方式.
Email: elem.kolomycev@yandex.ru
俄罗斯联邦, Podolsk, Moscow region; Moscow
N. Potekhina
NII NPO “LUCH”; Lomonosov Moscow State University
Email: elem.kolomycev@yandex.ru
俄罗斯联邦, Podolsk, Moscow region; Moscow
D. Kiselev
NII NPO “LUCH”; National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Email: elem.kolomycev@yandex.ru
俄罗斯联邦, Podolsk, Moscow region; Moscow
D. Zaitsev
NII NPO “LUCH”
Email: elem.kolomycev@yandex.ru
俄罗斯联邦, Podolsk, Moscow region
G. Ovsyannikov
NII NPO “LUCH”; Lomonosov Moscow State University
Email: elem.kolomycev@yandex.ru
俄罗斯联邦, Podolsk, Moscow region; Moscow
参考
- Huang L. Microstructure and mechanical properties of Mo-Nb single crystals via thermal annealing / Huang L., Zhang W., Hu Z Modifying // Metals. 2023. V.13. Art.1261. https://doi.org/10.3390/met13071261
- Yan M. Microstructure transformation of Mo–3Nb single crystal used for space thermionic reactor during welding / Yan M., Xinxin L., Huiping Z. // Progress in Nuclear Energy. 2021. V.137. https://doi.org/10.1016/j.pnucene.2021.103708
- Lange A. PVD thermal barrier coating systems for Mo–Si–B alloys / A. Lange, R. Braun, U. Schulz // Mater. High Temp. 2018. V. 35, №1–3. P.195–203. doi: 10.1080/09603409.2017.1404686
- Натансон, А.К. Молибден: сб. статей / А.К. Натансон; пер. с англ. – М.: Изд-во ИЛ, 1959. 304 с. – (Natanson, A.K. Molybdenum: collection of articles / A.K. Natanson; translated from English. – M.: Publ.FL, 1959. 304 p.)
- Зеликман, А.Н. Молибден / А.Н. Зеликман. – М.: Металлургия, 1970. 440 с. – (Zelikman, A.N. Molybdenum / A.N. Zelikman. – M.: Metallurgy, 1970. 440 p.)
- Gorr, B. A new strategy to intrinsically protect refractory metal based alloys at ultrahigh temperatures / B.Gorr, F. Müller, S. Schellert, H.J. Christ // Corros. Sci. 2020. V.166(2). P. 1–4.
- Butler, T.M. High temperature oxidation behaviors of equimolar NbTiZrV and NbTiZrCr refractory complex concentrated alloys (RCCAs) / T.M. Butler, K.J.Chaput, J.R. Dietrich // J. Alloys and Comp. 2017. V.729. P.1004–1019.
- Voyevodin, V. High-temperature heat-resistant coatings for protection of refractory metals and their alloys (overview) / V.Voyevodin, V. Zmii, S. Rudenkyi // Powder Metallurgy and Metal Ceramics. 2017. V. 56, №3–4. P.198–209.
- Mingming, Z. High vacuum arc ion plating TiAl coatings for protecting titanium alloy against oxidation at medium high temperatures / Mingming Z., Mingli S., Li X.// Corros. Sci. 2016. V.112. P.36– 43.
- Yaran, N. Microstructure evolution of plasma-sprayed MoSi2 coatings at RT-1200 °С in air/ Yaran N., Cuihong Z., Guocheng W. // J. Therm. Spray Tech. 2018. V.27. P. 938–948.
- Yaran, N. Microstructure characteristics and oxidation behavior of molybdenum disilicide coatings prepared by vacuum plasma spraying / Yaran N., Xiaoai F., Hongyan W. // Thermal Spray. 2013. V.22, №2–3. P. 96–103.
- Lange, A. Oxidation behavior of magnetron sputtered double layer coating molybdenum, silicon and boron / A. Lange, R. Braun, M. Heilmaier // Intermetallics. 2014. V.48. P. 19–27.
- Govindarajan, S. Synthesis of molybdenum disilicide on molybdenum substrates / S.Govindarajan, B. Mishra , D.L. Olson // Surface and Coatings Techn. 1995. V.76–-77. P.7–13.
- Majumdar, S. Development of multilayer oxidation resistant coatings on niobium and tantalum/ S Majumdar., P. Sengupta, G.B. Kale // Surface and Coatings Techn. 2006. V.200. P.3713–3718.
- Xu, Z. The protection, challenge, and prospect of anti-oxidation coating on the surface of niobium alloy/ Xu Z., Tao F., Kunkun C. // Coatings. 2011. V.11, №742.
- Mayr-Schmoler, B. Diffusion assisted reactive coatings for plasma resistant tungsten surfaces / B. Mayr-Schmoler, Th. Werninghaus, D. Wirges // Metal Powder Report. 2016. V.0. P.1–5.
- Ziyuan, Z. A new strategy to efficiently fabricate tungsten carbide coating on tungsten: Two-step interstitial carburization / Z. Ziyuan, L. Fuyuan, Z. Mingxuan // Surface and Coatings Techn. 2020. V.389. https://doi.org/10.1016/j.surfcoat.2020.125579
- Tang, Z Characterization and oxidation behavior of silicide coating on multiphase Mo–Si–B alloy/ Z. Tang, A. Thom, M. Kramer, M. Akinc // Intermetallics. 2008. V.16. P.1125– 1133.
- Fotovvati, B. On coating techniques for surface protection: A review/ B. Fotovvati, N. Namdari, A. Dehghanghadikolaei // Manufact. Mater. Proc. 2019. V.3, № 28. P.1–22.
- Hidnert, P. Thermal expansion of molybdenum / P. Hidnert, W.B. Gero // Scientific papers of the bureau of standards. 1924. V.488. №10. P. 429–444.
- Казанцев, Е.И. Промышленные печи: cправ. руководство для расчетов и проектир. / Е.И. Казанцев. – М.: Металлургия, 1975. 452 с. – (Kazantsev, E.I. Industrial furnaces: reference. manual for calculations and design / E.I. Kazantsev. – M.: Metallurgy, 1975. 452 p.)
- Moree, D.G. Study of chromium-frit-type coatings for high-temperature protection of molybdenum / D.G. Moree, L.H. Bolz , J.W. Pitts // Techn. Note. 1951. №2422.
- Aniolek, K. Characteristic of oxide layers obtained on titanium in the process of thermal oxidation / K. Aniolek, M. Kupka, A. Barylski // Arch. Metal. Mater. 2016. V.61. P.853–856.
- Lyon, S. Corrosion of molybdenum and its alloys / S. Lyon // Shreir՛s Corrosion. 2010. V.3. P. 2157–2167.
- Юхневич, Р. Техника борьбы с коррозией / Р. Юхневич, Е. Валашковский, А. Видуховский, Г. Станкевич; под ред. А.М. Сухотина. — Л.: Химия. ЛО, 1978. 301 с. – (Yukhnevich, R. Corrosion control technique / R. Yukhnevich, E. Valashkovsky, A. Vidukhovsky, G. Stankevich; edited by A.M. Sukhotin. — L.: Chemistry. LO, 1978. 301 p.)
- Biswas, B. Defect growth in multilayer chromium nitride/niobium nitride coatings produced by combined high power impulse magnetron sputtering and unbalance magnetron sputtering technique / B. Biswas, Y. Purandare, A.A. Sugumaran // Thin Solid Films. 2017. V.636. P.558–566.
补充文件
