电邮这篇文章 
INFLUENCE OF SELECTIVE LASER MELTING PARAMETERS AND POST-PROCESSING ON MAGNETIC PROPERTIES OF RING MAGNETIC CORE CABLES MADE OF IRON POWDER
- 作者: Shaimardanova L.G.1, Stepanova E.A.1, Maltseva V.E.1, Andreev S.V.1, Selezneva N.V.1, Shalaginov A.N.1, Seisembayeva V.R.1, Volegov A.S.1,2
-
隶属关系:
- Institute of Natural Sciences and Mathematics, Ural Federal University
- Institute of Metal Physics, Ural Branch of the Russian Academy of Sciences
- 期: 卷 126, 编号 7 (2025)
- 页面: 772-780
- 栏目: ЭЛЕКТРИЧЕСКИЕ И МАГНИТНЫЕ СВОЙСТВА
- URL: https://ruspoj.com/0015-3230/article/view/695550
- DOI: https://doi.org/10.31857/S0015323025070048
- ID: 695550
如何引用文章
开放存取
##reader.subscriptionAccessGranted##
订阅或者付费存取
详细
The work is devoted to the study of the magnetic hysteresis properties of ring-shaped magnetic cores made by selective laser melting (SLM) from iron powder. The dependence of the magnetic properties of the obtained samples on the parameters of additive manufacturing (speed and direction of the laser beam) and on subsequent heat treatment was investigated. It was found that reducing the speed of the laser beam spot movement along the build surface, selecting the direction of the laser beam spot movement along the axis perpendicular to the squeegee, and performing heat treatment leads to an increase in magnetic induction and magnetic permeability and a decrease in specific magnetic losses. This is due to the fact that during annealing, internal mechanical stresses are removed, the gradient of which hinders the movement of domain
boundaries during remagnetization. A comparison of the magnetic properties of printed samples and samples made by pressing from the same powder was carried out. It was shown that the pressed samples are inferior to the samples made by SLM in terms of magnetic induction and permeability.
作者简介
Lilia Shaimardanova
Institute of Natural Sciences and Mathematics, Ural Federal University
编辑信件的主要联系方式.
Email: Lilia.Shaimardanova@urfu.ru
俄罗斯联邦, Ekaterinburg, 620026 Russia
Elena Stepanova
Institute of Natural Sciences and Mathematics, Ural Federal University
Email: elena.stepanova@urfu.ru
俄罗斯联邦, Ekaterinburg, 620026 Russia
Viktoria Maltseva
Institute of Natural Sciences and Mathematics, Ural Federal University
Email: viktoria.maltseva@urfu.ru
俄罗斯联邦, Ekaterinburg, 620026 Russia
Sergey Andreev
Institute of Natural Sciences and Mathematics, Ural Federal University
Email: sergey.andreev@urfu.ru
俄罗斯联邦, Ekaterinburg, 620026 Russia
Nadezda Selezneva
Institute of Natural Sciences and Mathematics, Ural Federal University
Email: N.V.Selezneva@urfu.ru
俄罗斯联邦, Ekaterinburg, 620026 Russia
Arkady Shalaginov
Institute of Natural Sciences and Mathematics, Ural Federal University
Email: arkady.shalaginov@urfu.ru
俄罗斯联邦, Ekaterinburg, 620026 Russia
Viktoria Seisembayeva
Institute of Natural Sciences and Mathematics, Ural Federal University
Email: v.r.seysembaeva@urfu.me
俄罗斯联邦, Ekaterinburg, 620026 Russia
Alexey Volegov
Institute of Natural Sciences and Mathematics, Ural Federal University;Institute of Metal Physics, Ural Branch of the Russian Academy of Sciences
Email: alexey.volegov@urfu.ru
俄罗斯联邦, Ekaterinburg, 620026 Russia;
Ekaterinburg, 620108 Russia
参考
补充文件
