Stress-strain properties of microwave-irradiated polymer composite based on PDI-3A rubber

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription or Fee Access

Abstract

The stress diagram of polymer composite material based on PDI-3A rubber filled with thermally expanded graphite or potassium chloride before and after microwave treatment for 300, 600, 900 and 1200 s has been studied. A twofold increase in tensile strength and deformability was found after microwave treatment for 300 c and testing at 223 K. With increasing the test temperature or microwave treatment time, a marked decrease in the deformation and tensile strength characteristics of the obtained composites was observed.

Full Text

Restricted Access

About the authors

E. Nurullaev

Perm National Research Polytechnic University

Email: sadush@icp.ac.ru
Russian Federation, Perm

L. L. Khimenko

Perm National Research Polytechnic University

Email: sadush@icp.ac.ru
Russian Federation, Perm

A. N. Kozlov

Perm State Agro-Technical University

Email: sadush@icp.ac.ru
Russian Federation, Perm

S. R. Allayarov

Federal Research Center of Problems of Chemical Physics and Medicinal Chemistry RAS

Author for correspondence.
Email: sadush@icp.ac.ru
Russian Federation, Chernogolovka, Moscow region

References

  1. Belkhir K., Riquet G., Becquart F. // Advances in Polymer Technology. 2022. V. 2022. Article ID 3961233. 21 p.
  2. Hoogenboom R., Schubert U.S., Wiesbrock F. // Microwave-assisted Polymer Synthesis. N-Y: Springer Cham, 2016. 351 p.
  3. Hosur M.V., Menon A., John M.K., Rangari V.K., Jeelani S. // International SAMPE symposium and exhibition. 2005. V. 50. P. 1659.
  4. Rakhmankulov D.L., Bikbulatov I.H., Shulaev N.S., Shavshukova S.Y. // Microwave radiation and intensification of chemical processes. M.: Khimiya, 2003. 220 p.
  5. Abutalipova E.M., Kuzeyev I.R., Shulaev N.S. // Oil and Gas Business. Electron. journal. 2013. № 4. P. 316.
  6. Abakacheva E.M., Suleymanov D.F. Shulaev N. S. // Butler Communications. 2011. V. 24. No. 1. P. 95.
  7. Nurullaev E., Khimenko L.L., Allayarov S.R. // High Energy Chemistry. L., Allayarov S. R. // High Energy Chemistry. 2024. V. 58. P. 242.
  8. Nurullaev E.M. // Applied Mechanics and Technical Physics. 2021. V. 62. № 2. P. 53.

Supplementary files

Supplementary Files
Action
1. JATS XML
Download
2. Scheme 1

Download (174KB)
Indexing metadata
3. Fig. 1. Dependence of conventional stress on deformation of polymer composite material filled with thermally expanded graphite (a–c) or potassium chloride (d–e) on the time of microwave treatment (s): 0 (1), 300 (2), 600 (3), 900 (4), 1200 (5). The study was conducted at a temperature (K): 223 (a, d), 298 (b, d), 323 (c, e).

Download (355KB)
Indexing metadata
4. Fig. 2. Dependences of the tensile strength (a, b), deformation (c, d) and elastic modulus (d, e) of PCM filled with thermally expanded graphite (a–c) or potassium chloride (d–e) on the microwave treatment time. The study of the deformation and strength characteristics was carried out at a temperature (K): 223 (1), 298 (2), 323 (3).

Download (366KB)
Indexing metadata

Copyright (c) 2024 Russian Academy of Sciences