Preparation of Polymetal Powder Systems Fe–Ni–Co–Al in Aqueous Solutions and Their Physical Characteristics

A. F. Dresvyannikov; Дресвянников А. Ф.; M. E. Kolpakov; Колпаков М. Е.; E. A. Ermolaeva; Ермолаева Е. А.

doi:10.31857/S0044453723100072

Preparation of Polymetal Powder Systems Fe–Ni–Co–Al in Aqueous Solutions and Their Physical Characteristics

Authors: Dresvyannikov A.F.¹, Kolpakov M.E.¹, Ermolaeva E.A.¹
Affiliations:
1. Kazan National Research Technological University
Issue: Vol 97, No 10 (2023)
Pages: 1421-1429
Section: ФИЗИЧЕСКАЯ ХИМИЯ РАСТВОРОВ
Submitted: 26.02.2025
Published: 01.10.2023
URL: https://ruspoj.com/0044-4537/article/view/668640
DOI: https://doi.org/10.31857/S0044453723100072
EDN: https://elibrary.ru/TQMNAS
ID: 668640

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription or Fee Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

The possibility of preparation of a polymetallic dispersed Fe–Ni–Co–Al system in aqueous solutions by a redox process between iron(III), nickel(II), cobalt(II) ions and aluminum microparticles in aqueous solutions is shown. In this case, a structure is formed in the aqueous solution, which, from the standpoint of the phase composition, is a mechanical mixture of elemental metals. It has been found that the synthesized Fe–Ni–Co–Al system consists of metallic aluminum particles coated with elemental metals (iron, nickel, and cobalt) with a minimum content of the oxide phase. Additional HF modification of the studied sample of the polymetallic system in low pressure inductive discharge plasma leads to the formation of a number of intermetallic compounds, mainly CoFe (~60%) and FeNi (~15%), and also ensures particle spheroidization. The resulting intermetallic powder composition is potentially suitable for use in additive manufacturing technologies.

Keywords

aluminum, iron family metals, plasma, intermetallics

References

Lasalmonie A. // Intermetallics. 2006. V. 14. № 10–11. P. 1123. https://doi.org/10.1016/j.intermet.2006.01.064
Liu W., Dupont J.N. // Metall. Mater. Trans. A. 2003. V. 34. P. 2633.https://doi.org/10.1007/s11661-003-0022-3
Chaudhary V., Nartu M.S.K.K.Y., Mantri S.A. et al. // J. Alloys Compd. 2020. V. 823. 153817. https://doi.org/10.1016/j.jallcom.2020.153817
Paganotti A., Bessa C.V.X., Silva C.C.S. et al. // Mater. Chem. Phys. 2021. V. 261. 124215. https://doi.org/10.1016/j.matchemphys.2020.124215
Tanaka Y., Kainuma R., Omori T., Ishida K. // Mater. Today: Proc. 2015. V. 2. P. S485. https://doi.org/10.1016/j.matpr.2015.07.333
Tan X., Tang Y., Tan Y. et al. // Intermetallics. 2020. V. 126. 106898. https://doi.org/10.1016/j.intermet.2020.106898
LiP., WangA., Liu C.T. // Ibid. 2017. V. 87. P. 21. https://doi.org/10.1016/j.intermet.2017.04.007
Agustianingrum M.P., Yoshida S., Tsuji N., Park N. // J. Alloys Compd. 2019. V. 781. P. 866. https://doi.org/10.1016/j.jallcom.2018.12.065
Zuo T.T., Li R.B., Ren X.J., Zhang Y. // J. Magn. Magn Mater. 2014. V. 371. P. 60. https://doi.org/10.1016/j.jmmm.2014.07.023
Betancourt-Cantera L.G., Sánchez-De Jesús F., Bolarín-Miró A.M. et al. // J. Mater. Res. Technol. 2020. V. 9. № 6. P. 14969. https://doi.org/10.1016/j.jmrt.2020.10.068
Shafi K., Gedanken A., Prozorov R. et al. // J. Mater. Res. 2000. V. 15. № 2. P. 332. https://doi.org/10.1557/JMR.2000.0052
Solanki V., Lebedev O.I., Seikh M.M. et al. // J. Magn. Magn. Mater. 2016. V. 420. P. 39. https://doi.org/10.1016/j.jmmm.2016.06.087
Csik A., Vad K., Tóth-Kádár E., László P. // Electrochem. Commun. 2009. V. 11. P. 1289. https://doi.org/10.1016/j.elecom.2009.04.027
Zhang Y., Ma R., Feng S. et al. // J. Magn. Magn. Mater. 2020. V. 497. 165982. https://doi.org/10.1016/j.jmmm.2019.165982
Gayathri A., Kiruthika S., Selvarani V. et al. // Fuel. 2022. V. 321. 124059. https://doi.org/10.1016/j.fuel.2022.124059
Wang Z., Cheng L., Zhang R. et al. // J. Alloys Compd. 2021. V. 857. 158249. https://doi.org/10.1016/j.jallcom.2020.158249
Коч К., Овидько И.А., Сил С., Вепрек С. Конструкционные нанокристаллические материалы. Научные основы и приложения / Пер. с англ. под ред. М.Ю. Гуткина. М.: Физматлит, 2012. 447 с. [Koch C., Ovid’ko I.A., Seal S., Veprek S. Structural Nanocrystalline Materials. Fundamentals and Applications. Cambridge University Press. 2007. 364 p.]
Дресвянников А.Ф., Колпаков М.Е. // Журн. физ. химии. 2006. Т. 80. № 2. С. 321. [Dresvyannikov A.F., Kolpakov M.E. // Russ. J. Phys. Chem. A. 2006. V. 80. № 2. P. 254. https://doi.org/10.1134/S0036024406020245]
Дресвянников А.Ф., Колпаков М.Е., Ермолаева Е.А. // Там же. 2020. Т. 94. № 6. С. 823. [Dresvyannikov A.F., Kolpakov M.E., Ermolaeva E.A. // Ibid. A. 2020. V. 94. № 6. P. 1098. https://doi.org/10.1134/S0036024420060084]
Дресвянников А.Ф., Колпаков М.Е. // Журн. общ. химии. 2005. Т. 75. № 2. С. 177. [Dresvyannikov A.F., Kolpakov M.E. // Russ. J. Gen. Chem. 2005. V. 75. № 2. P. 155. https://link.springer.com/article/10.1007/s11176-005-0190-5]
Tseng Y.-T., Wu G.-X., Lin J.-C. et al. // J. Alloys Compd. 2021. V. 885. 160873. https://doi.org/10.1016/j.jallcom.2021.160873
Torabinejad V., Aliofkhazraei M., Assareh S. et al. // Ibid. 2016. V. 691. P. 841. https://doi.org/10.1016/j.jallcom.2016.08.329
Hessami S., Tobias C.W. // J. Electrochem. Soc. 1989. V. 136. P. 3611.https://doi.org/10.1149/1.2096519
Bertazzoli R., Pletcher D. // Electrochim. Acta. 1993. V. 38. № 5. P. 671. https://doi.org/10.1016/0013-4686(93)80237-T
Martinez-Blanco D., Gorria P., Blanco J.A. et al. // J. Phys.: Condens. Matter. 2008. V. 20. P. 335213. https://doi.org/10.1088/0953-8984/20/33/335213
Дресвянников А.Ф., Колпаков М.Е., Миронов М.М. // Физика и химия обраб. матер. 2010. № 3. С.58. [Dresvyannikov A.F., Kolpakov M.E., Mironov M.M. // Inorg. Mater.: Appl. Res. 2012. V. 3. № 3. P. 193. https://doi.org/10.1134/S2075113311030075]