Study of the microhardness distribution in a coating based on tungsten carbides obtained by laser surfacing on a stainless steel surface

N. S. Dovbysh; Довбыш Н. С.; D. I. Gavrilov; Гаврилов Д. И.; A. V. Zhdanov; Жданов А. В.; V. V. Morozov; Морозов В. В.

doi:10.31857/S0367676523702812

Study of the microhardness distribution in a coating based on tungsten carbides obtained by laser surfacing on a stainless steel surface

Authors: Dovbysh N.S.¹, Gavrilov D.I.¹, Zhdanov A.V.¹, Morozov V.V.¹
Affiliations:
1. Vladimir State University
Issue: Vol 87, No 11 (2023)
Pages: 1626-1630
Section: Articles
URL: https://ruspoj.com/0367-6765/article/view/654564
DOI: https://doi.org/10.31857/S0367676523702812
EDN: https://elibrary.ru/FEEWHV
ID: 654564

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription or Fee Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

We studied the microhardness of the wear-resistant coating obtained by laser powder surfacing on the surface of 420 stainless steel. The dependences between the treatment mode, the obtained hardness and the geometry of the coating are established. It is determined that when a total equal voltage is applied to all diodes, the generated radiation does not provide uniform penetration of the substrate, and as a result, the formation of a uniform coating, both from the point of view of geometry and from the point of view of overall surface hardness. The hardness values of both individual solid particles of tungsten carbides and the total surface of the zone of thermal influence are obtained.

Keywords

laser surfacing, protective coating, tungsten carbide, nickel powder, microhardness, normal distribution

References

Хорохордин И.С. // Пробл. геол. и осв. недр. 2019. Т. 2. С. 526.
Шегельман И.Р., Васильев А.С., Клюев Г.В. // Научн. иссл.: от теор. к практ. 2015. № 1(2). С. 198.
Радченко М.В., Радченко Ю.О., Шевцов Т.Б. // 7 междунар. научн.-практ. конф. “Инновации в машиностроении – 2015” (Кемерово, 2015). С. 405.
Шевцов Ю.О., Радченко М.В. // Инновации в топливно-энергетическом комплексе и машиностроении, 2019. С. 119.
Лаптева И.А., Сарилов М.Ю., Коннова Г.В. // Междунар. научн.-техн. конф. “Современные направления и перспективы развития технологий обработки и оборудования в машиностроении 2018” (Севастополь, 2018). С. 206.
Екубов Т.Д., Фоменко Р.Н. // Сб. научн. статей “Наука и инновации – современные концепции” (Москва, 2021). С. 210.
Бородихин С.А., Лосев А.С., Еремин Е.Н. // Россия молодая: передовые технол. – в промышленность. 2017. № 1. С. 8.
Полосков С.С. // Персп. иннов. и разр. 2019. Т. 1. С. 243.