Pyrolytic Decomposition of Polyethylene in the Presence of Aluminosilicate Materials Containing Nickel Oxide

V. B. Kharitontsev; Харитонцев В. Б.; M. V. Grigoriev; Григорьев М. В.; Е. A. Tissen; Тиссена Е. А.; P. A. Zubenko; Зубенко П. А.; N. Yu. Tretyakov; Третьяков Н. Ю.; A. V. Elyshev; Елышев А. В.

doi:10.31857/S0453881124010018

Pyrolytic Decomposition of Polyethylene in the Presence of Aluminosilicate Materials Containing Nickel Oxide

Authors: Kharitontsev V.B.¹, Grigoriev M.V.¹, Tissen Е.A.¹, Zubenko P.A.¹, Tretyakov N.Y.², Elyshev A.V.³
Affiliations:
1. Laboratory of Theory and Optimization of Chemical and Technological Processes, University of Tyumen
2. Institute of Chemistry, University of Tyumen
3. World-Class Research Center “Advanced Digital Technologies”, University of Tyumen
Issue: Vol 65, No 1 (2024)
Pages: 3-11
Section: ARTICLES
URL: https://ruspoj.com/0453-8811/article/view/660315
DOI: https://doi.org/10.31857/S0453881124010018
EDN: https://elibrary.ru/HAEUJB
ID: 660315

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract

The work is devoted to the study of the pyrolysis of high-density polyethylene (PE) in the presence of aluminosilicate materials containing nickel oxide. The process of catalytic pyrolysis of plastics makes it possible to convert polymers into chemical compounds, which can later be used as an additional source of fuels, raw materials for the chemical industry or polymer production. The physicochemical parameters of materials containing nickel oxide have been established using the following methods: IR-Fourier spectroscopy; x-ray diffraction analysis; N2 physical adsorption method; thermogravimetric analysis; pyrolytic gas chromatography. The dependences of the chemical composition of PE pyrolysis products on the type of support used and the presence of nickel oxide. The presence of nickel oxide in the studied aluminosilicates increases the Lewis acidity, which increases the content of aromatic compounds in the pyrolysis products. The activation energy of the PE pyrolysis process in the presence of MCM-41 containing nickel oxide was calculated from experimental data.

Keywords

pyrolysis, polyethylene, nickel oxide, clay, thermal analysis

Full Text

References

Бракк Д.Г. // Экономическая безопасность. 2022. T. 5. № 2. C. 673.
Kim S.-K., Kim J.-S., Lee H., Lee H-J. // J. Hazard. Mater. 2021. V. 403. P. 123997.
Muhammad C., Onwudili J. A., Williams P. T. // J. Anal. Appl. Pyrol. 2015. V. 113. P. 332.
Soufizadeh M., Doniavi A., Hasanzadeh R. // Int. J. Environ. Sci. Technol. 2022. V.19. P. 3897.
Larionov K.B., Slyusarskiy K. V., Ivanov A. A., Mishakov I. V., Pak A. Y. // J. Air Waste Manag. Assoc. 2022. V. 72. № 2. P. 161.
Kenzhin R.M., Bauman Y. I., Mishakov I. V., Zibareva I. V. // Juniper Online J. Mater. Sci. 2019. V. 5. № 2. P. 555660. P. 1–7.
Ding Y., Zhao J., Liu J-W., Zhou J., Cheng L., Zhao J., Shao Z., Iris C., Pan B., Li X., Hu Z.-T. // J. Clean. Prod. 2021. V. 293. P. 126144.
Miandad R., Barakata M. A., Rehan M., Aburiazaiza A. S., Ismail I. M.I., Nizami A. S. // Waste Management. 2017. V. 69. P. 66.
Li K., Wang Y., Zhou W., Cui T., Yang J., Sun Z., Min Y., Lee J-M. // Chemosphere. 2022. V. 299. P. 134440.
Lu P., Wu H., Liang C., Wei Y., Song Z. // Appl. Clay Sci. 2021. V. 205. P. 106052.
Skaribas S.P., Pomonis P. J., Grange P., Delmon B. // J. Chem. Soc. Faraday Trans. 1992. V. 88. P. 3217.
Wu Q., Wang Y., Jiang L., Yang Q., Ke L., Peng Y., Yang S., Dai L., Liu Y., Ruan R. // Biores. Technol. 2020. V. 299. P. 122611.
Yao D., Yang H., Chen H., Williams P. T. // Appl. Catal. B: Environ. 2018. V. 239. P. 565.
Ding K., Liu S., Huang Y., Liu S., Zhou N., Peng P., Wang Y., Chen P., Ruan R. // Energy Convers. Manag. 2019. V. 196. P. 1316.
Prabhahar R.S.S., Anandhan M. // Int. J. Appl. Eng. Res. 2018. V. 13. № 10. P. 8426.
Rashid A., Mohammed S. A., Abbas H. F., AlSaadi M.A., Ali N., Khalid N., Yousif E., Alyaqoobi S., Al Riami K. // Biointerface Res. Appl. Chem. 2023. V. 13. I. 3. P. 216.
https://doi.org/10.33263/BRIAC133.216
Datka J., Turek A.M, Jehng J.M, Wachs I. E. // J. Catal. 1992. V. 135. P. 186.
Costa C.S., Munoz M., Ribeiro M. R., Silva J. M. // Catal. Today. 2021. V. 379. P. 192.
Chen C., Li H. Davis M. E. // Micropor. Mater. 1993. V. 2. P. 17.
Харитонцев В.Б., Тиссен Е. А., Матвеенко Е. С., Михайлов Я. А., Третьяков Н. Ю., Загоруйко А. Н., Елышев А. В. // Катализ в промышленности. 2023. T. 23. № 2. C. 58. (Kharitontsev V. B., Tissen E. A., Matveenko E. S., Mikhailov Ya. A., Tret’yakov N. Yu., Zagoruiko A. N. and Elyshev A. V. // Catalysis in Industry. 2023. V.15, № 4. P. 397.)
Munoz H.-J., Blanco C., Gil A., Vicente M.-A., Galeano L.-A. // Materials. 2017. V. 10. № 12. P. 1364.
Ferrini P., Dijkmans J., De Clercq R., Van de Vyver S., Dusselier M., Jacobs P. A., Sels B. F. // Coord. Chem. Rev. 2017. V. 343. P. 220.
Островский Н. М. // Кинетика и катализ. 2022. Т. 63. № 1. С. 61.
Чалов К.В., Луговой Ю. В., Сульман М. Г., Косивцов Ю. Ю. // Вестник ТвГУ. 2020. Т. 42. № 4. С. 120.
Хандави М. М. Исследование термического разложения и горения полимерных отходов методом кислородной микрокалориметрии. Автореф. дис… к. т. н. Санкт-Петербург: Санкт-Петербургский политехнический университет Петра Великого, 2021. 23 с.