High-precision measurement of the group velocity of ultrasound in structural materials on a small base

Мұқаба

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

A method for high-precision measurement of the group velocity of ultrasound in millimeter-thick metal plates using a laser thermo-optical source of ultrasonic pulses is considered. Thickness-calibrated Gauge blocks are used as samples. The influence of the ultrasonic beam diffraction effect and other technical factors are taken into account. It has been experimentally shown that deconvolution of a signal with a pulse characteristic of a receiving converter, together with digital filtering, helps to reduce the dispersion of group velocity measurements – it is less than 0.2% for samples with thicknesses of 1–2 mm.

Толық мәтін

Рұқсат жабық

Авторлар туралы

D. Makalkin

Prokhorov General Physics Institute of the Russian Academy of Sciences; MIREA – Russian Technological University

Хат алмасуға жауапты Автор.
Email: dmitrymakalkin@yandex.ru
Ресей, Moscow; Moscow

A. Karabutov

Prokhorov General Physics Institute of the Russian Academy of Sciences

Email: dmitrymakalkin@yandex.ru
Ресей, Moscow

E. Savateeva

Prokhorov General Physics Institute of the Russian Academy of Sciences

Email: dmitrymakalkin@yandex.ru
Ресей, Moscow

Әдебиет тізімі

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML
Жүктеу
2. Fig. 1. Experimental setup (fragment).

Жүктеу (190KB)
Метадеректер
3. Fig. 2. Raw signal for a 1 mm thick sample.

Жүктеу (135KB)
Метадеректер
4. Fig. 3. Stages of signal processing with reflected ultrasonic pulses for a sample 1 mm thick: without processing (a), after digital filtering (b), after digital filtering and deconvolution (c).

Жүктеу (195KB)
Метадеректер
5. Fig. 4. Histograms of the frequency of occurrence of the group velocity value for samples of 1.000 (a), 1.500 (b) and 1.900 mm (c) without deconvolution. The average velocity value in this distribution is shown in orange, and the number in the blue frame is the largest relative deviation from the average.

Жүктеу (184KB)
Метадеректер
6. Fig. 5. Pulse response of the receiving converter (fragment).

Жүктеу (87KB)
Метадеректер
7. Fig. 6. Histograms of the frequency of group velocity value dropout for samples with thicknesses of 1.000 (a), 1.500 (b) and 1.900 mm (c) using deconvolution.

Жүктеу (168KB)
Метадеректер

© Russian Academy of Sciences, 2024